Before You Run The Provision Tool

  • (Recommended) Run prereq.sh to get the system ready to deploy Omnia. Alternatively, ensure that Ansible 2.12.9 and Python 3.8 are installed on the system. SELinux should also be disabled.

  • To provision the bare metal servers, download one of the following ISOs for deployment:

  • To dictate IP address/MAC mapping, a host mapping file can be provided. Use the pxe_mapping_file.csv to create your own mapping file.

  • Ensure that all connection names under the network manager match their corresponding device names.

    nmcli connection

In the event of a mismatch, edit the file /etc/sysconfig/network-scripts/ifcfg-<nic name> using vi editor.

  • When discovering nodes via SNMP or a mapping file, all target nodes should be set up in PXE mode before running the playbook.

  • If RHEL is in use on the control plane, enable RedHat subscription. Not only does Omnia not enable RedHat subscription on the control plane, package installation may fail if RedHat subscription is disabled.

  • Users should also ensure that all repos are available on the RHEL control plane.

  • Ensure that the pxe_nic and public_nic are in the firewalld zone: public.

  • The control plane NIC connected to remote servers (through the switch) should be configured with two IPs in a shared LOM set up. This NIC is configured by Omnia with the IP xx.yy.255.254, aa.bb.255.254 (where xx.yy are taken from bmc_nic_subnet and aa.bb are taken from admin_nic_subnet) when discovery_mechanism is set to bmc. For other discovery mechanisms, only the admin NIC is configured with aa.bb.255.254 (Where aa.bb is taken from admin_nic_subnet).